Analyzing the oils used in construction machinery can be useful because you can read information about wear from the contents of the used oil. To do this, a mechanic or technician uses a very clean container and a pump to remove oil, e.g. from the engine, from the hydraulic circuit or from the gearbox. The extracted oils are sent to a certified laboratory. There, the lubricants are analyzed for their ingredients using various methods. It can be used to determine whether there are increased levels of silicon, sulphur, copper, coolant or other trace elements in the oil.
Heavy Machinery Oil sampling
When is it reasonable to analyse oils of used heavy equipment?
An analysis of the existing oils only makes sense if you have an approximate idea of how long the oil was in use. If the oil has only recently been changed, an analysis of the condition is not very useful. There are then too few analyzable particles in the oil. If the oil used is much older than permitted, i.e. the change intervals have been significantly exceeded, the values will also be incorrect. But if the oil is in a normal change cycle, you can read a lot of information from the trace elements. It is therefore important to know whether the prescribed maintenance intervals on the construction machine have been observed.
What influence have working hours and temperatures to oil condition?
As already described above, it is important to know or to be able to estimate the service life of the existing oils. And to get meaningful results, it is necessary to warm up the machine. Otherwise there will be many particles, e.g. deposited on the bottom of the oil pan or in the filter. The oil must therefore be vigorously moved and the viscosity increased in order to obtain meaningful results.
What info does an oil sample report contain and what does it tell us?
A professional laboratory for the analysis of construction machine oils usually provides us with an interpretation of the analyzed values. Too much silicon means dirt gets into the machine’s systems and you have to look at where and how dirt gets into the system. If coolant is found in the engine oil, there is a problem in the cooling system. If traces of aluminum are found in the transmission oil, one can conclude that there is increased wear in some components. The same applies to the presence of chromium, copper or magnesium. As soon as we have the results of an oil analysis, our technicians will advise you and describe the possible causes. A hint is given on what to do to avoid early problems.
By the way, to guarantee high quality of our oil analysis we work on this sector with the lab of Zeppelin Baumaschinen which is the CAT dealer for several countries in Europe.
Who can offer inspections for used screen plant in Europe?
Mevas is known as a inspection service for used construction machinery. Did you know we also inspect screening and processing equipment? Mobile Crushing & Screening Equipment is often in bad condition when it hits the used-market. Screening plant, especially when used in recycling aggregate applications have in many cases worn screen boxes. Tough job to exchange.
What to look for when buying used screen equipment?
Conveyors have damaged belts and seized rollers. Often, we see cracks in frames and leaks on hydraulics. Of course this is just the special part of inspection. All other components of a used screen are of course inspected as well. Our inspectors use a detailed screen plant inspection checklist. We can offer inspections in all areas of the Europe.
We hope our article was helpful for you. Feel free to comment below the post about your experiences looking for used screening equipment.
Terex Finlay Supertrack
What is a screening plant needed for on the construction site or in the quarry?
A screening plant, also known as a screening machine or screener, is a piece of equipment used in construction sites and quarries for the purpose of separating and classifying materials based on size or other characteristics. Screening plants play a crucial role in the construction and quarry industries for several reasons:
Sorting and Separating Materials: Screening plants are used to sort and separate materials, such as aggregates, soil, sand, gravel, and crushed stone, into different sizes or grades. This is essential for various construction applications.
Quality Control: Screening plants are employed to ensure that the materials used in construction meet the specified size and quality requirements. They help eliminate oversized or undersized particles, which can affect the quality and performance of the end product.
Aggregate Production: In quarries, screening plants are often used to produce different grades of aggregate materials, which are essential components in concrete, asphalt, and other construction materials.
Environmental Compliance: Screening plants are used to remove debris, contaminants, and foreign objects from soil and other materials, ensuring that they meet environmental standards before being used in construction or other applications.
Recycling Operations: In recycling facilities, screening plants are used to separate recyclable materials from waste and to classify materials for further processing, such as the separation of construction and demolition waste.
Cost Efficiency: By separating materials into different grades, screening plants enable the efficient use of resources, as the right materials can be used for specific tasks, reducing waste and improving cost efficiency.
Increased Productivity: The use of screening plants can significantly increase the productivity of construction and quarry operations by automating the process of material classification and reducing the need for manual sorting.
Uniform Product Quality: Screening ensures that the final product, whether it’s aggregate for concrete or other materials, is consistent in size and quality, leading to improved structural performance and overall quality.
Reduced Equipment Wear and Tear: By removing oversized or abrasive materials before they enter crushers or other processing equipment, screening plants help reduce wear and tear on downstream machinery.
Flexibility: Many screening plants are portable and can be easily transported to different job sites or areas within a quarry, providing flexibility in material processing.
Screening plants can vary in size and design, from small mobile units to large stationary systems, and they may use different mechanisms for classifying materials, such as vibrating screens, trommel screens, or scalping screens. The choice of screening plant depends on the specific requirements of the construction or quarry operation, the types of materials being processed, and the desired output sizes or grades.
How is a screening plant for the construction site or quarry constructed?
A screening plant for a construction site or quarry is typically constructed with several key components and follows a specific design and assembly process. Here’s an overview of how a screening plant is typically constructed:
The screening plant requires a stable foundation and support structure. This may involve the following steps:
Site Preparation: Clear and level the ground at the selected location to create a suitable foundation.
Foundation Construction: Depending on the plant’s size and weight, a concrete foundation or footings may be required to support the equipment.
Support Structure: Assemble the support structure, including frames and mounts for the screening equipment and conveyors.
The core components of the screening plant include the screening equipment itself. This includes:
Screening Machine: Install the chosen screening equipment, whether it’s a vibrating screen, trommel screen, or scalping screen, according to the manufacturer’s specifications.
Screen Decks: If the screening machine has multiple decks or layers, assemble and arrange them for the desired material separation.
Drive Mechanism: Install the drive system (usually motor-driven) for the screening equipment to power the screen.
Conveyor systems are often integrated into screening plants to transport materials to and from the screening equipment:
Feed Conveyor: Install a conveyor to transport raw materials to the screening machine for processing.
Output Conveyor: Set up conveyors to transport screened materials to the desired location, such as stockpiles or loading areas.
Optional Conveyors: Depending on the specific design and needs, additional conveyors may be used for recirculating materials or sorting.
To ensure the efficient operation of the screening plant, you may need to establish certain support infrastructure, which can include:
Water Supply: If water is required for the screening process (e.g., for washing or dust suppression), set up a water supply system.
Electricity or Power Supply: Ensure a reliable power source, including electrical connections or generators, for the screening equipment.
Control Room: If the screening plant is equipped with advanced controls, establish a control room where operators can manage and monitor the screening process.
Incorporate maintenance access points and safety features to ensure the plant can be serviced and operated safely:
Walkways and Platforms: Create safe walkways and platforms for access to the equipment and for maintenance activities.
Safety Barriers: Install safety barriers, guardrails, and warning signs as needed to protect workers.
Before putting the screening plant into full operation, conduct testing and calibration to ensure that it operates as intended and meets the required material classification criteria.
Train personnel to operate the screening plant safely and efficiently, and establish operating procedures and protocols.
Implement a routine maintenance and inspection schedule to keep the screening plant in good working condition and to address any issues promptly.
The construction of a screening plant is a detailed process that requires careful planning, skilled labor, and adherence to safety and environmental regulations. The specific design and construction can vary depending on the type of materials, the scale of the operation, and the chosen screening equipment.
How can I check if a used machine is in good condition?
South Africa is a gigantic market for the mining and construction industry. Manufacturers from Caterpillar to Liebherr and Bell are present with branches and sales. Mining and construction companies have a great need for machines. As a result, used machines keep coming onto and from the market.
Export to other African areas
Due to the short transport routes, the machines are of interest to many construction companies and mines in other parts of Africa. So what could be closer to buying machines there? Of course, it would be good to know whether the machines are in reasonable condition.
Which company can inspect machines in South Africa?
Mevas has local inspectors available in South Africa which can help with the inspection of used construction equipment and civil engineering. Qualified engineers inspect the machines, create a report, take various photos and can also create a video of the machine in operation. Our team knows about excavators, wheel loaders, motor graders, backhoe loaders, quarry trucks, and bulldozers. We check a single machine as well as fleets of machinery.
How can I check if my excavator hydraulic pump is working well?
In the event that the hydraulic excavator does not have enough power or even when buying an excavator, it is useful to check whether the hydraulic pump has enough power. Normally, however, you do not have any equipment for measuring pressure with you. Don’t forget that pressure alone is not a criterion for sufficient power. You would also have to measure the volume of the oil flow.
So what can be done to check the performance of the hydraulic pump?
An excavator usually has a so-called load-sensing pump. The pump’s sensors constantly check the pressure and the oil volume demanded. The pump permanently adjusts the volume flow and the pressure to the requirements during work. To check performance, an experienced inspector will usually test whether the excavator can make three different working movements at the same time without slowing down the flow of one working movement. For example, lifting the boom, extending the arm and extending the bucket at the same time. The inspector must note whether there are one or more hydraulic pumps for the different components. Often the traction drive has a separate pump.
Pressure test for comparison with the manufacturer’s data
The type of test described so far is helpful if you do not have a pressure gauge available. However, for a more accurate test of performance, it is helpful to be able to measure pressures. To do this, the inspector needs to connect a pressure gauge to the test ports and measure the pressures for the pump and the pilot pressure. The recorded data must be compared with the manufacturer’s specifications.
Which company can inspect an excavator with pressure measurement?
Some MEVAS inspectors are equipped with dial gauges. We can offer a very thorough examination of the condition of used hydraulic excavators in various countries. Of course, we are also responsible for any other construction machine and for large equipment from the mining industry. The guide can be downloaded here.
The swing bearing is one of the weakest points in the structure of an excavator. At this point, the stable undercarriage, the so-called X-frame, is connected to the superstructure. The superstructure rotates endlessly on this pivot. On a larger excavator, you will find a counterweight weighing perhaps 15 tonnes. It balances the whole machine and is designed to keep the machine stable and balanced with the arm extended and the bucket full. On the other hand, this means that when the bucket is empty and the arm is close to the machine, the rear side of the machine is loaded.
To ensure that everything runs well, the pivot bearing, also called the slewing ring, has several lubrication points. Ideally, these are supplied with grease of the right consistency by an automatic lubrication system.
Swing bearing play measurement for excavator
The rollers or rolls of the large bearing now run permanently over the running surfaces, generating wear through friction and pressure. At some point, the play becomes so large that machine safety is endangered. When inspecting a used excavator, it therefore makes sense to measure whether the play is still within the permissible tolerance.
How to measure?
To do this, the slewing ring must be loaded once and then unloaded again after the dial gauge has been placed on it. The play is measured between these two states. Most inspectors for construction machinery know the procedure. Depending on the equipment of the machine, one must decide whether a filled excavator bucket is sufficient to achieve the load on the front, or whether additional weights are required. Also the use of a hydraulic jack can be considered.
When to measure, cost for replacing?
Our inspectors have the necessary knowledge to carry out a measurement correctly. During used machine inspection process the inspector does a functional test. Experienced technicians can feel already at this stage if a measurement is required. After the measurement, we can help to decide whether the play is acceptable or whether you need to replace the slewing ring. The Liebherr R964 excavator pictured above had 5mm clearance across the front of the frame and 4.7mm across the side. It is not safe to continue working with this slew ring. Exchange will cost probably more than 12.000 $
Who can inspect used shredders and recycling equipment?
The search for used recycling technology is not so easy. Once you have found what you are looking for, the question is whether the machine is in good condition. We offer technical inspections for such equipment to check that.
Whether high-speed or low-speed, the bearing arrangement of the shredder rollers must be examined. Additional equipment such as hammers etc. must be looked at closely. In shredders sometimes material is fed by roller or chain conveyors. The technician must therefore understand how the plant is constructed and which component has what function. We have the necessary background knowledge.
Mevas inspectors are available in Europe and many countries around the globe. And we are constantly expanding our network to support our customers in the best possible way.
We do not deal in technology ourselves, all we do is inspect used machines.
A exciting part of our work is machine inspections of used Civil Engineering Equipment. These machines are particularly complex and have diverse specifications. We can check drill rigs, pilling machinery, desanding machines, vibrators, vibration hammers and leaders, diesel impact hammers, telescopic leaders, RTG equipment, grab systems, duty-cycle cranes and diaphragm wall grabs.
By the way do you have experience with this kind of machines? Do you know what a Kelly bar is and on which machine it is in use? Let us know in the comments!
If you do not have a qualified technician at hand or the machine is located far away from them, you are welcome to contact us.
Bauer drilling rig – inspected by Mevas
What kind of heavy civil engineering equipment is known and what is it used for?
Heavy foundation equipment is specialized machinery used in the construction of foundations for buildings, bridges, and other structures. These machines are designed to handle the challenges of excavating, drilling, and preparing the ground to support the weight and stability of the structure. Here are some common types of heavy foundation equipment and their primary uses:
Pile Drivers: Pile drivers are used to install piles (vertical structural supports) into the ground. These piles can be made of concrete, steel, or wood and serve as the foundation for structures. Pile drivers use hydraulic or diesel hammers to drive piles into the soil.
Drilling Rigs: Drilling rigs are used to bore deep holes into the ground for various foundation types, including drilled piers, caissons, and micropiles. They are commonly used in projects requiring deep foundation solutions with CFA. Well known are brands such as Bauer, Casagrande or Soilmec.
Vibrodrivers: Vibrodrivers use vibration and force to drive sheet piles or steel H-beams into the ground. They are particularly useful for creating retaining walls and other foundation support structures.
Cranes: Cranes are used to lift and place heavy elements of a foundation, such as precast concrete sections or steel beams. They are also employed for positioning drilling rigs and piling equipment. Cranes are often used for diaphragm wall foundation.
Compactors: Compactors are used to compact the soil or fill material, ensuring proper density and support for the foundation. They come in various forms, including plate compactors and roller compactors.
Concrete Mixers and Batch Plants: These machines are used to mix and batch concrete for various foundation types, including footings, slabs, and mat foundations.
Foundation Drills: These drills are specifically designed for creating holes and bores in the ground for piles or caissons. They can include rotary drills and auger drills.
Soil Stabilizers: Soil stabilizers are used to improve the properties of the soil by mixing it with binding agents. This is essential for creating a solid foundation in areas with challenging soil conditions.
Tunnelling Equipment: In the case of tunnel foundations, specialized equipment such as tunnel boring machines (TBMs) are used to excavate tunnels in underground construction projects.
The choice of foundation equipment depends on the specific requirements of the project, the type of foundation needed, and the geological and environmental conditions of the site. Proper foundation preparation is crucial to ensure the stability and longevity of the structure being built.
Which company can inspect used quarry and mining equipment?
Unlocking Your Fleet’s True Value: Expert Fleet Machinery Inspections by MEVAS
When the time comes to navigate the intricate terrain of selling entire fleets of heavy machines, a crucial question invariably arises for the discerning seller or buyer: How can you gain an accurate, unbiased appraisal of the machinery’s condition and true value?
Enter MEVAS, your trusted partner in the world of fleet machinery inspections within quarries and mining operations. With a vast network of seasoned technicians who possess an intimate understanding of the construction and mining industry’s colossal machines, we stand ready to help you embark on your next venture with unwavering confidence.
Why Choose MEVAS?
Global Expertise, Local Insight: Our international presence enables us to offer on-the-ground expertise wherever your fleet may be. Whether it’s a quarry in the heartland or a mining operation on the other side of the world, our technicians are well-versed in the nuances of heavy machinery.
Proven Track Record: Over the past few years, MEVAS has played a pivotal role in diverse and fascinating projects across the globe. Our portfolio boasts success stories that span continents, reinforcing our reputation as a reliable and results-driven partner.
Rapid, Accurate Assessment: In the fast-paced world of construction and mining, time is of the essence. With MEVAS, you’ll experience a swift and precise assessment of your machinery. Our experts can efficiently evaluate multiple machines in a short span, allowing you to make informed decisions without delay.
At MEVAS, we understand the importance of transparency and reliability when dealing with fleet machinery. Our detailed inspection reports provide a comprehensive view of each machine’s condition, ensuring you have the information needed to make sound decisions about your fleet’s future.
Don’t leave the fate of your heavy machinery to chance. Choose MEVAS for a partnership that brings clarity, precision, and value to your fleet machinery transactions. Experience a new level of confidence with our fleet machinery inspection services.
If you would like to know more about this, please contact us. You can also find some interesting pictures on our website under “Pictures and stories“
Do you like this article? Let us know.
CAT rigid dump truck inspection in Kentucky
Which kind of machinery is usually used in a quarry?
Quarries are mining operations where various types of machinery are used to extract and process minerals, rocks, and other resources from the earth. The specific machinery used in a quarry depends on the type of material being extracted and the scale of the operation. Here are some common types of machinery used in quarries:
Excavators:Excavators are heavy machinery with a bucket or shovel attachment at the front. They are used for digging, excavating, and removing overburden (unwanted material) to access the desired resources.
Loaders: Front-end loaders are used to load extracted material, such as rocks, into trucks for transportation. They are essential for moving large quantities of material quickly.
Bulldozers: Bulldozers are used to level and shape the terrain, push large rocks, and remove overburden. They are valuable for creating the working surface in a quarry.
Haul Trucks: Large trucks, including rigid dump trucks and articulated trucks, transport the extracted material from the quarry to processing or storage areas. These trucks have a high payload capacity.
Drills:Drilling equipment is used to create holes in the rock or mineral deposit for blasting or extraction. Types of drills used in quarries include blasthole drills and rotary drills.
Blasters: Blasters are responsible for drilling patterns and safely detonating explosives to break large rocks into smaller, more manageable pieces for extraction.
Crushers and Screens:Crushers are used to break down large rocks and minerals into smaller, marketable sizes. Screens separate material by size, allowing for the selection of specific grades of material.
Conveyors: Conveyors transport material from crushers and screens to various processing areas. They are crucial for efficient material handling within the quarry.
Wheel Loaders: Smaller wheel loaders are used for various tasks, such as moving material within the quarry, loading trucks, and handling stockpiles.
Water Trucks: Water trucks are used for dust suppression and controlling airborne particles, helping maintain a safe working environment.
Excavator Attachments: Various attachments for excavators, such as rock breakers and grapples, can be used to assist in material extraction.
Wire Saws and Chain Saws: These specialized saws are used to cut large blocks of stone or rock, especially in dimension stone quarries.
Dewatering Equipment: In wet quarries, pumps and dewatering equipment are used to manage water levels and maintain a dry working environment.
Environmental Control Equipment: This includes systems for controlling dust and monitoring air quality, as well as water management systems to prevent contamination of nearby water sources.
The specific machinery and equipment used in a quarry may vary depending on the type of material being extracted (e.g., limestone, granite, sand, gravel, or minerals) and the quarry’s size and operational needs. Safety measures and environmental considerations are also crucial in quarry operations to minimize the impact on surrounding ecosystems and communities.
Is it a good idea to purchase used heavy equipment on auctions?
When you are looking for used machinery but you can’t find any around your home, it might be an idea to check used machinery auctions. To reduce your risk before buying, you can book a Mevas technician for an inspection. He will check the machine or the machines on your behalf. On auction sites we offer a special kind of inspection for a lower fee.
We are specialized in inspection of heavy machinery. Mevas can deliver detailed inspection for small machines such as a mini digger of 2 ton but of course we can also inspect a 100ton mining truck, a 200ton capacity mobile crane or big excavators.
What kind of experiences have you had when buying used machines? Let us know in the comments.
Mevas inspections in Europe and countries worldwide
Advantages and Risks of buying machinery on auctions
Purchasing used heavy equipment at auctions can be a good idea, but it comes with both advantages and potential risks. Whether it’s a good idea for you depends on your specific needs, budget, and willingness to take on certain uncertainties. Here are some of the pros and cons of buying used heavy equipment at auctions:
Advantages:
Cost Savings: Auctions often provide the opportunity to acquire heavy equipment at a lower cost compared to buying new or from dealerships. You might find good deals on well-maintained machinery.
Diverse Selection: Auctions offer a wide range of equipment, from different manufacturers, models, and types, allowing you to choose the one that best fits your needs.
Opportunity to Bargain: In some cases, you may be able to negotiate a lower price or secure a good deal if bidding competition is limited.
Quick Acquisition: Auctions can be a relatively fast way to acquire the equipment you need, especially if you win a bid or make a purchase on the spot.
Potential for Unique Finds: Some rare or specialized equipment may be available at auctions, which might not be readily found through traditional dealerships.
Risks and Considerations:
Limited Inspection Time: You may have limited time to inspect the equipment thoroughly before bidding. This can lead to unexpected issues if you overlook important details.
Unknown History: It can be challenging to ascertain the maintenance and usage history of used equipment at auctions, which increases the risk of hidden problems.
Competition: Auctions can be competitive, and you may end up paying more than you originally intended if there is strong demand for a particular machine.
No Warranty: Most auction sales are typically “as-is,” meaning you may have little or no recourse if the equipment encounters issues shortly after purchase.
Buyer’s Premium and Fees: Auctions often involve additional costs in the form of buyer’s premiums and fees, which can add to the overall purchase price.
Ownership Transfer and Logistics: You’ll need to manage the logistics of transporting the equipment to your location, which can be a significant cost and logistical challenge, especially for large machinery.
Understanding the Auction Process: It’s important to understand how auctions work, including bidding strategies and payment terms, to participate effectively.
Whether purchasing used heavy equipment at auctions is a good idea for you depends on your comfort level with these considerations, your experience with heavy machinery, and your ability to mitigate risks through careful inspection and research. If you choose to go this route, be sure to thoroughly research the auction, conduct due diligence, and, if possible, attend preview days to inspect the equipment in person. Consulting with experts or having a qualified mechanic or inspector on hand can also help you make informed decisions.
Which auction platforms are globally relevant for purchase and sales of used heavy machinery?
Several auction platforms are globally relevant for the purchase and sale of used heavy machinery. These platforms have a broad international presence and offer a wide range of construction and heavy equipment. Here are some globally recognized auction platforms for used heavy machinery:
Ritchie Bros. Auctioneers: Ritchie Bros. is one of the largest and most well-known auction companies for used heavy equipment. They hold auctions worldwide, both on-site and online.
IronPlanet:IronPlanet is an online auction platform for used construction equipment, offering a wide selection of machinery and trucks. They are known for their IronClad Assurance, which provides equipment condition reports.
Euro Auctions: Euro Auctions conducts heavy equipment auctions across Europe and other regions. They are especially known for their periodic auctions of industrial equipment.
Proxibid: Proxibid is an online marketplace and auction platform that hosts a variety of auctions, including those for heavy machinery and construction equipment.
AuctionTime: AuctionTime, a subsidiary of Sandhills Global, specializes in online auctions for construction equipment, trucks, and agricultural machinery.
Mascus: Mascus is an online marketplace for used heavy machinery and trucks, allowing buyers and sellers to connect directly. It lists equipment from various countries.
Government Surplus Auctions: Many governments and municipalities hold surplus equipment auctions online, making it possible to find used machinery at competitive prices. Websites like GovDeals in the United States are relevant in this context.
Plant & Equipment: Plant & Equipment is an online platform for buying and selling construction equipment and machinery, offering a global marketplace for heavy equipment transactions.
Iquippo: Iquippo is an online marketplace for used construction equipment, operating in India but with a growing presence in other countries.
TradeMachines: TradeMachines is a search engine for used machinery auctions. It aggregates listings from various auction platforms, making it a convenient tool for finding equipment globally.
eBay: While primarily known for consumer goods, eBay has a section dedicated to heavy equipment auctions and listings. It’s a global platform with a variety of construction machinery.
Bar None Auction: Bar None Auction is an auction company that conducts heavy equipment and machinery auctions in various locations, primarily in North America.
When participating in global machinery auctions, it’s essential to carefully review the listings, understand the terms and conditions of the auction, and conduct thorough due diligence on the equipment. Many of these platforms offer inspection reports, photos, and detailed information about the machinery, allowing buyers to make informed decisions. Additionally, consider factors like shipping and import/export regulations when buying equipment from different countries.
These days it is hard to find used machinery in good condition. If you are in the process of purchasing equipment, we can help you to select the good machines. Mevas is offering technical inspections for an affordable service fee in Europe and some other countries.
Where to search for used heavy machinery in Europe? You can have a look at www.used-equipment.de as a start for your search. We made this page as a support for those who are looking to buy machines.
What kind of experiences have you had when buying used machines? Let us know in the comments.
Where can you find a large selection of used heavy construction equipment?
You can find a large selection of used heavy construction equipment through various sources, both online and offline. Here are some common places to search for used heavy construction equipment:
Online Equipment Marketplaces:
Online marketplaces like MachineryTrader, Equipment Trader, IronPlanet, Ritchie Bros. Auctioneers, and MarketBook feature extensive listings of used construction equipment. These platforms allow you to search by type, make, model, location, and price range.
Auction Websites:
Many heavy equipment auctions take place online. Websites like Proxibid and GovDeals host auctions for a wide range of equipment, including construction machinery.
Manufacturer Websites:
Some construction equipment manufacturers have sections on their websites dedicated to used equipment listings. Examples include Caterpillar Used Equipment, John Deere Used Equipment, and Komatsu Used Equipment.
Rental Companies:
Equipment rental companies often sell their used equipment when it reaches the end of its rental life. You can inquire with companies like United Rentals, Sunbelt Rentals, and others.
Local Dealerships:
Visit local construction equipment dealerships in your area. They may have a selection of used machinery for sale.
Classified Websites:
Websites like Craigslist and Facebook Marketplace may have listings for used construction equipment in your region.
Construction Equipment Trade Shows:
Attending trade shows and exhibitions related to construction and heavy equipment is an excellent way to see equipment up close and network with sellers and dealers.
Industry Publications:
Some industry publications and magazines have classified sections where used construction equipment is advertised for sale.
Networking:
Reach out to your professional network, including colleagues, contractors, and industry contacts, to inquire about available used equipment. Word of mouth can be a valuable resource.
When searching for used heavy construction equipment, it’s essential to do your due diligence, thoroughly inspect the equipment, and ensure that it meets your specific requirements and budget. Be sure to check the equipment’s maintenance and service history, request all relevant documentation, and consider having a qualified mechanic or inspector assess the machine’s condition before making a purchase.
We only use the most necessary cookies. Please accept.
Most necessary
Always active
Die technische Speicherung oder der Zugang ist unbedingt erforderlich für den rechtmäßigen Zweck, die Nutzung eines bestimmten Dienstes zu ermöglichen, der vom Teilnehmer oder Nutzer ausdrücklich gewünscht wird, oder für den alleinigen Zweck, die Übertragung einer Nachricht über ein elektronisches Kommunikationsnetz durchzuführen.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistiken
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
Die technische Speicherung oder der Zugriff ist erforderlich, um Nutzerprofile zu erstellen, um Werbung zu versenden oder um den Nutzer auf einer Website oder über mehrere Websites hinweg zu ähnlichen Marketingzwecken zu verfolgen.
